Models
|
RPT Electronics Toll Free: 1 866 465-0927 www.rptelectronics.com e-mail to RPT Electronics info@rptelectronics.com |
|
Two Digit Version Shown on the right is the 2-digit version which is our most popular system. Additional displays can easily be added. Digits are 6 inches high, and are readable for up to 300 feet. All the necessary mounting hardware and connecting wire is included. Installation can be done by one person in a few hours, and does not require a licensed electrician. |  |
|
Three Digit Version Same features as above, but with 3-digits. This photo shows how the display and key pad are mounted. Of course, in normal use the keypad would be located elsewhere. This display measures 8 by 16 inches. Maximum visibility and attractive presentation is a key design goal in these units. Additional keypads and displays can be added. |
|
Four Digit Display Shown on the right is the 4-digit version in a black frame. Additional displays can be added as with our other displays. Case measures 21 by 8 inches. As in our other displays, the digits are 6 inches high. At present, this is only available as a wireless display using a cordless phone, (see 'Wireless Models'). | 
|
|
Wireless Models: 2, 3 and 4 digit. For temporary situations where a permanent installation is not practical, we offer a wireless version of the 'Silent Usher'. This inexpensive alternative works in a unique way using an ordinary cordless phone. You DO NOT need a regualr telephone connection for this method to work, the phone base unit communicates directly to the pager display. You can set it up and use it anywhere there is a regular power outlet. Nothing to carry or loose, no batteries to replace, complete portability. Drop us an e-mail for more details. |
 |
|
|
 | Keypads are laid out the same as on a telephone. They are easy to use, and basic instructions are clearly visible. We also supply an additional laminated instruction card to pin to the wall next to the keypad. |  
| Our wired-in displays are equipped with a small terminal
strip on the side of the display. You can request left of right side mounting if you wish. For portable use we offer XLR audio type connectors. These are very strong and will stand up to repeated use. let us know if you need this feature. There is a small additional charge. |
|
Finishes Available The following four stains are available. The light oak is standard unless you specify another finish at the time of your order. The flat black finish has a slightly textured appearance due to the wood grain. Other finishes are available upon request and at a minimal charge.
|
|
